Web Toolbar by Wibiya

Author Topic: mkp2 chops  (Read 1085 times)

0 Members and 1 Guest are viewing this topic.

Offline ja7667

  • Newbie
  • *
  • Posts: 32
  • Karma: +0/-0
  • Gender: Male
  • I love RAP4
mkp2 chops
« on: March 10, 2013, 04:06:06 PM »
hi need help. i have a mkp2 kit and it seems to be choping in the barrel. every 4 or 5 balls. check for berr's. used over size barrel. change the acorn the barrel screws into. im useing valken paint graffiti. im useing a box mag. not getting paint in the feed tube from the box mag.  a little paint in the ball chamber but mostly in the barrel. used the barrel and box mag on my a5 mag kit work fine. useing a techt bolt rubber nose. please help.

Offline azntactical

  • Sr. Member
  • ****
  • Posts: 315
  • Karma: +6/-0
  • Gender: Male
  • The T68 is my cup of tea.
Re: mkp2 chops
« Reply #1 on: March 11, 2013, 11:20:34 AM »
are you saying that its jamming? if so, check out the anti role back pin guide. that may be your case. either bend it up more or remove it. either way will not hurt.

Offline ja7667

  • Newbie
  • *
  • Posts: 32
  • Karma: +0/-0
  • Gender: Male
  • I love RAP4
Re: mkp2 chops
« Reply #2 on: March 11, 2013, 04:23:23 PM »
hi. no jams it shoots 4 or 5 balls them brakes one.

Offline John

  • RAP4 Staff
  • Global Moderator
  • Full Member
  • *****
  • Posts: 293
  • Karma: +37/-8
  • Gender: Male
Re: mkp2 chops
« Reply #3 on: March 12, 2013, 08:43:27 AM »
Do you have a factory phenom bolt you can try? The problem might be with the the techt bolts. The chamber tolerances are different from the Phenom.

Offline ja7667

  • Newbie
  • *
  • Posts: 32
  • Karma: +0/-0
  • Gender: Male
  • I love RAP4
Re: mkp2 chops
« Reply #4 on: March 12, 2013, 12:59:36 PM »
hi. i will try it this weekend and let you know .
    thank you